Jump to content
Corsair Community

Corsair TWINX1024-3200XLPRO & asus A7N8X


Recommended Posts

Hi i got some problems.

I installed my pair of TWINX1024-3200XLPRO in my systems and have had some trouble ever since. Random reboots and games like Halflife 2 and Painkiller crashes to desktop. Halflife 2 chrases after 10-20 minutes painkiller runs longer.

And sometimes when i am doing nothing special the computer just reboots. its damn annoying.

I turned up the DDR voltage to 2.8v but no change.

Sys specs:

Barton 2500 running @ 2000mhz (10x200)


Radeon 9800 Pro

Tagan 380w PSU

Asus A7N8X 2.0

Nec 3500a dvd

120 gb Hdd


So the DDR ram is running at 200 mhz(400mhz) (100%)

Memory bios settings:

Active precharge delay : 5

Ras to cas: 2

Ras Precharge: 2

Cas Latency: 2

DDR voltage: 2.8V

Running in dual channel mode

I ran Memtest for 40 mins and it found no errors.

Any suggestions?

Oh and im swedish so the english might not be perfect


Link to comment
Share on other sites

When i check with sisoft sandra i get Rev 1.XX on the motherboard

bios 1006

SiSoftware Sandra:


General Information

Manufacturer : Phoenix Technologies, LTD

Version : ASUS A7N8X2.0 ACPI BIOS Rev 1006

Date : 08/19/2003

Plug & Play Version : 1.00

SMBIOS/DMI Version : 2.20

(EE)PROM Size : 256kB (2Mbit)

Link to comment
Share on other sites

vel its says A7N8X2.0 so my guess would be rev 2.0

Also i 2.8 is the highest Voltage setting on my board. got 2.6, 2.7, 2.8

i saw one thing now, the FSB says 200.45 on WCPUID and the same thing on sisoft sandra.

Could that cause this?


*edit* Um when i lowered the FSB to 199 everything works perfectly...

Have been playing HL 2 for 40 minutes witout a problem now

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...