zoochick Posted December 10, 2004 Share Posted December 10, 2004 Can someone suggest overclock timings/BIOS settings with this combo? Running A64 3500 with 2GB memory. Tried the Gigabyte performance setting (F6 BIOS) but produces BSOD in Win XP Pro SP2. Suggestions anyone?? Thanks a bunch, Zoe Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 15, 2004 Corsair Employees Share Posted December 15, 2004 Please make sure that you have the latest BIOS for your MB and load Setup/optimized default settings, and try the following BIOS settings; TwinX1024 or TwinX512-3200C2 Advanced Chipset Features (Ctrl + F1) DRAM Clock: 400 MHz Configure Dram timing by SPD: Disabled/User define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T SDRAM Burst Length: 8 SDRAM Bank Interleave: 4/Auto/Enabled SDRAM Command Rate: 1T Frequency Voltage Control CPU Freq: 200 Memory or Dim Reference voltage: 2.7/2.75 Volts (+.2) AGP Voltage: Default *unless you have ATI 9200 or 9600 then 1.6 Volts suggested!* All other settings should be set to default settings! Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.