Jump to content
Corsair Community

ASUS P4P800S-E Deluxe


Recommended Posts

hi RamGuy

I have an ASUS P4P800S-E Deluxe motherboard and I try to make it work with 2 modules of 1 GB, CMX1024-3200PRO, without any overclocking.

The CPU is a pentium 3 GHz (15 x 200 MHz).

I tried to set DDR rate at 400 MHz and 320 MHz, in both setups I tried and cycles, and I also tried all in auto mode.

all configs seems to start but they all crashes, sometimes a blue screen while XP is booting, sometimes the computer freezes after 5 or 10 minutes.

What settings would you advise to me to make it work?

Link to comment
Share on other sites

  • Corsair Employees
Please make sure that you have the latest bios and then load setup defaults and set the Dim Voltage to 2.75 Volts and set the timings manually to Cass 3-3-3-8 and please set the performance mode to AUTO and then test the system with http://www.memtest.org. But you may need to disable legacy US when running this program.
Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...