inspire Posted December 7, 2004 Share Posted December 7, 2004 System has problems POSTING with the following setup; Motherboard: Shuttle AB60N (newest bios installed 10/12/04 AB60S00Y) CPU: Northwood 2.60Ghz FSB: 200 Memory: TwinX1024-3200C2PT Memory Timing: 2,3,3,6 or 2.5,3,3,6 Memory Voltage: 2.75v PSU: Enermax 400w The machine was running ValueSelect 2x256mb at 3,3,3,8 with no problems, and will run the Twinx ram at 3,3,3,8 with no problems, but will take over 10 restarts to finally post with any other settings. Ran MEMTEST without any problems being reported. TIA Jae Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 7, 2004 Corsair Employees Share Posted December 7, 2004 I would suggest testing the modules in another system to be sure, but if you are passing http://www.memtest.org and still have this problem, it is likely some other issue. And testing the modules in another system will help to isolate the memory from your system. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.