Jump to content
Corsair Community

OC'ing XMS512-3200XLPRO


Recommended Posts

I have a A7N8X-E deluxe that works great at 2-2-2-5 at stock settings with a XP3200+..now I want to get the best from it..With my old Value Select VS512MB400 I could run at 230x10.5 and be stable at 2.5-3-3-10. With this XMS stuff, I can't get over 225x10.5 or I get booted from 3DMark1 at 2-3-3-8. This is with a modded 1012 BIOS that allows for 2.9vdimm and the vcore at 1.85v

At 233fsb it won't even POST. Isn't this the same chips that is in the PC3700 and PC4000 sticks..Am I asking too much?

Link to comment
Share on other sites

Some of the 3700s, 4000s, and 4400s do use the same chips, however those chips are tested at those speeds and warrantied at those speeds. If they fail those tests, they still may be able to meet the requirements to be branded XL and warrantied as such. Of course, there are some chips that are only tested for the XL requirements and not tested for the higher specs at all.

 

Ultimately, they MAY be able to do those speeds, but there's no guarantee.

Link to comment
Share on other sites

Thanx for clearing that up...I read a review someplace that said different...so much for believing someone other than the factory...

 

 

 

 

Just an update...got it to 240fsb x 10 prime stable at 2-3-3-8

Think that is about it for this mb though

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...