JuilyMTB Posted November 29, 2004 Share Posted November 29, 2004 :confused: A repeating beep error code is heards and the desktop board does not boot and not show any video. Intel MoBo D925XCV with Pentium4 3.4 Ghz. L2 and CORSAIR XMS2_twin2x1024-5400c4 are Compatible? Link to comment Share on other sites More sharing options...
JuilyMTB Posted November 29, 2004 Author Share Posted November 29, 2004 :confused: A repeating beep memory error code is heards and the desktop board does not boot and not show any video. Intel MoBo D925XCV with Pentium4 3.4 Ghz. L2 and CORSAIR XMS2_twin2x1024-5400c4 are Compatible? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 29, 2004 Corsair Employees Share Posted November 29, 2004 Should be fine with this MB, however Intel does not give the option to Over Clock your CPU so they may not be able to run at the tested settings on this MB. I would try the modules one at a time and then reset or clear the bios and see if it will post and update to the latest version and then set the Dim Voltage to 1.9 Volts and see if that helps. Link to comment Share on other sites More sharing options...
JuilyMTB Posted December 3, 2004 Author Share Posted December 3, 2004 Tnk Ram Guy, but I did that, I did Change BIOS Version and volt. too (1.8v to 1.95v) but this MoBo (D925XCV Extreme Edtion Series) only show 533 MHz to 667 MHz and This Memory (Twin2X-5400XMS2 Pro Series) are 675Mhz. The Fan and Ligth is ON but not Sound Error (Beep Error) and not show nothing in the monitor, I need help by this case, Tanks again. Link to comment Share on other sites More sharing options...
JuilyMTB Posted December 8, 2004 Author Share Posted December 8, 2004 Tnk Ram Guy, but I did that, I did Change BIOS Version and volt. too (1.8v to 1.95v) but this MoBo (D925XCV Extreme Edtion Series) only show 533 MHz to 667 MHz and This Memory (Twin2X-5400XMS2 Pro Series) are 675Mhz. The Fan and Ligth is ON but not Sound Error (Beep Error) and not show nothing in the monitor, I need help by this case, Tanks again. :(: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 8, 2004 Corsair Employees Share Posted December 8, 2004 You will have to set the memory Freq to 533, I am sorry but the Intel version of the MB will not allow you to Over Clock the CPU to the Frequency needed to run the memory at their tested settings. If you have an option in the bios for 677 on the memory, you will need to take that up with Intel. Link to comment Share on other sites More sharing options...
JuilyMTB Posted December 21, 2004 Author Share Posted December 21, 2004 Do you Know setup configuration or any method for this configuration? Link to comment Share on other sites More sharing options...
Wired Posted December 21, 2004 Share Posted December 21, 2004 Each pair is tested and packaged together using the following settings: CPU External Frequency: Manually set to 250MHz DDR2 SDRAM Clock: Manually set to 533MHz DRAM Timing Selectable: Auto Yields the following timings SDRAM CAS Latency: 4T SDRAM RAS to CAS Delay (tRCD): 4T SDRAM Row Precharge (tRP): 4T SDRAM Active to Precharge Delay (tRAS): 12T DDR2 SDRAM Voltage: 1.9 NB Voltage 1.9 Volts (On Abit AA8 Only) All other settings are motherboard defaults. Maximum DDR2 recommended VDIM Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.