Jump to content
Corsair Community

Corsair Custom Sleeved Cables..


recklesszero777
 Share

Recommended Posts

  • Corsair Employees

Since that's not a Corsair product, it's hard to say what they actually work with. But the AX cables typically ARE DIFFERENT than the other Corsair cables.

 

The AX650/750/850 "Gold" PSUs have their own pin out. The AX760/860 Platinum are the same as AXi except for the 24-pin.

Link to comment
Share on other sites

  • 1 year later...
Since that's not a Corsair product, it's hard to say what they actually work with. But the AX cables typically ARE DIFFERENT than the other Corsair cables.

 

The AX650/750/850 "Gold" PSUs have their own pin out. The AX760/860 Platinum are the same as AXi except for the 24-pin.

 

Is there some kind of a pin out diagram showing the difference between the AX and AXi series connectors? I have an AX1200 with custom cables (custom in both sleeve color and length). Lookin at updating my PSU, but would like to not have to re-sleeve all of the cables if possible. But if all it takes is switching a few pins, I'm fine with that. Thanks.

 

http://farm8.staticflickr.com/7117/6924972518_22007e1b23_c.jpg

Link to comment
Share on other sites

  • Corsair Employees

Updating your PSU to what?

 

The AX1200 uses a Type 3 cable for the 24-pin, but all of the other connectors are unique to the AX1200.

 

If you get an AXi, you'll need to switch out all of the cables. The 8-pins are pretty easy, though, since the polarity is just switched.

 

AX1200:

 

attachment.php?attachmentid=24984&d=1461080374

 

Type 3 (AXi, HXi and RM):

 

attachment.php?attachmentid=24985&d=1461080379

AX1200.thumb.JPG.14703d4f58dc1a4c42a47f27dd971436.JPG

901210172_Type3.thumb.JPG.78d5680c959cb157051b2c738f42a4e4.JPG

Link to comment
Share on other sites

  • Corsair Employees
I have a CS450M which uses the same type 3, but it has fixed 2x12 and EPS12V cables which is fine as all rigs need them.

 

So my PSU has 3 of the peripheral power and only 1 of the PCI Express plugs.

 

Is that a question or a statement?

Link to comment
Share on other sites

Updating your PSU to what?

 

The AX1200 uses a Type 3 cable for the 24-pin, but all of the other connectors are unique to the AX1200.

 

If you get an AXi, you'll need to switch out all of the cables. The 8-pins are pretty easy, though, since the polarity is just switched.

 

AX1200:

 

attachment.php?attachmentid=24984&d=1461080374

 

Type 3 (AXi, HXi and RM):

 

attachment.php?attachmentid=24985&d=1461080379

 

Thanks for providing this! Looking to upgrade to a HX1200i.

Link to comment
Share on other sites

  • 2 years later...
 Share

×
×
  • Create New...