TybeR Posted November 21, 2004 Share Posted November 21, 2004 ok i have this mother board K8T Neo2 Series and i have corsair memory 512mb 184pin ddr-dimm the number vs512mb400c3 lot# 0445007-0 but i have a problems because my ram in my systems he have only 256mb i put on 1st green slot ( user manuel is writed ) i check the bios and i put optinized setting and i have 256 mb too if you have a idea plz send me a mail tyber_1st@hotmail.com thx !! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 22, 2004 Corsair Employees Share Posted November 22, 2004 Please make sure you have the memory on slot 1 and latest BIOS installed in your MB and load optimized/optimal default settings, and try the following BIOS settings; Advanced Chipset: Memclock Mode: Manual (400) Bank Interleaving: 4/Enabled Burst Length: 4 SDRAM CAS Latency: 3T SDRAM RAS to CAS Delay (tRCD): 4T SDRAM Active to Precharge Delay (tRAS): 8T SDRAM Row Precharge (tRP): 4T Frequency Voltage Control: Spread Spectrum: Enabled CPU FSB Clock: 200 DDR Voltage: 2.7/2.75 Volts All other settings should be set to default settings! Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure! Link to comment Share on other sites More sharing options...
TybeR Posted December 21, 2004 Author Share Posted December 21, 2004 ok is does n work !!! my 512mb ram is work only 256mb and today 20december i buy a new 512mb ram i put on my computer .... same thing 256mb :[pouts: now i have 512 mb ... but i want 1,24 ghz but i paid for this do you have a anwser !!! sorry for my english ...my french Link to comment Share on other sites More sharing options...
Wired Posted December 21, 2004 Share Posted December 21, 2004 Try them with a different processor, as the memory controller (which is located on the processor) may be bad. It could also be the motherboard, but that I doubt. Link to comment Share on other sites More sharing options...
TybeR Posted December 21, 2004 Author Share Posted December 21, 2004 how to flash a bios i got a new version i dont know to install Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted December 22, 2004 Corsair Employees Share Posted December 22, 2004 I would encourage you to contact the MB maker to help you with flashing the bios. Or MSI has a forum that you may find some help with as well. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.