NightBlade Posted November 18, 2004 Share Posted November 18, 2004 I have a P4C800-E deluxe mobo and I bought a CMX512-3200C2PT in June2004 and I currently bought a new one in November 2004. I tried to dual channel it but i get no video. I have no idea what's the problem but when I test them by themselves, they work without any problem. Link to comment Share on other sites More sharing options...
Wired Posted November 18, 2004 Share Posted November 18, 2004 What is the revision of each stick? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 18, 2004 Corsair Employees Share Posted November 18, 2004 Please make sure that you have the latest BIOS for your MB and load Setup/optimized default settings, and try the following BIOS settings; CMX512-3200C2 Advanced/Jumper Free AI over clocking: Manual CPU Freq: 200 DRAM Clock: 400 MHz Memory or Dim Reference voltage: 2.75 Volts System performance: Standard AGP Voltage: Default *unless you have ATI (9200 or 9600) or NVIDIA (5200 or 5700) then 1.6 Volts suggested!* Advanced/Chipset Configure Dram timing by SPD: Disabled/User define SDRAM CAS Latency: 2.5T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 7T SDRAM Burst Length: 8 Performance Acceleration Mode: Auto or Enabled USB Legacy Support: Disabled All other settings should be set to default settings! Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.