gara Posted November 18, 2004 Share Posted November 18, 2004 Hello! My system was unstable with my corsair memory module, but not with my noname module, so i test my corsair memory module with these timings 6-3-3-2.5 under Memtest, and it found a lot of errors as soon as the 6th test.. Detail: Tst Pass Failing Adress 6 1 0000dfbc254 -- 223.7MB 6 1 0000fe93254 -- 254.1MB 6 1 0000bd28a54 -- 189.5MB 6 1 0000cb86254 -- 203.3MB 10 errors like that in the 6th test... :( Ref: CMX-512-3200C2PRO Lot# 0433007-2 Mortherboard= Asus A7n8x-e Deluxe Rev 1.1 Cpu Fsb Jumper on pos. 2-3 Last Bios 1012 What should i do? My settings are ok, don't they? Thanks for your answer! Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 18, 2004 Corsair Employees Share Posted November 18, 2004 Did you set the timing up manually or auto detect at that setting, also did you change the DDR voltage to 2.7 volts? Link to comment Share on other sites More sharing options...
gara Posted November 19, 2004 Author Share Posted November 19, 2004 Thanks for your answer I tried to set up the timing manually by the bios, and put the vDimm at 2.7v, i have always the same errors... Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 19, 2004 Corsair Employees Share Posted November 19, 2004 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
gara Posted November 23, 2004 Author Share Posted November 23, 2004 I completed the form for an RMA two days ago, but I didn't receive it! What do I have to do? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 24, 2004 Corsair Employees Share Posted November 24, 2004 Please send us a email with a copy of the form or all of your info: Name Address and Phone# and the Module part# and copy the link to this post and email it to Rma@corsairmemory.com. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.