bobuilder Posted November 17, 2004 Share Posted November 17, 2004 Hi i am have some memory trouble i have 1024 twinx 3200ll memory running at TwinX1024 or TwinX512-3200LL Advanced/Jumper Free AI over clocking: Manual CPU Freq: 200 DRAM Clock: 400 MHz Memory or Dim Reference voltage: 2.75 Volts System performance: Standard AGP Voltage: Default, unless you have ATI 9200 or 9600 then 1.6 Volts suggested! Advanced/Chipset Configure Dram timing by SPD: Disabled/User define SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 6T Performance Acceleration Mode: Enabled All other settings should be set to default settings! (copy from one of you solutions) one stick of the memory passes ok on memtest the other one fails test errors 1 70 2 0 3 3 4 15834 then it crashes partway throught test5 it does this every time ( i have tryed it 3 times) i would be gratefull of any help Bob Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 17, 2004 Corsair Employees Share Posted November 17, 2004 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.