chrisk Posted November 14, 2004 Share Posted November 14, 2004 I have recently instaled a TWINX1024-3200XLPRO on my P4P800-E deluxe motherboard with an intel 865 pe chipset. when running graphics intensive programs like doom3 and far cry, the graphics get messed up.my GPU is a XFX GeForce 6800 Ultra and my CPU is a P4 3.2GHz prescott(800fsb,1Mb L2 cache),with my old RAM (corsair VS 1Gb-pc3200) doom3 and farcry ran perfectly on all the highest settings but now the graphics get messed up.i know that it is the TWINX1024-3200XLPRO causing the problems because i swapped it for my old RAM and it worked fine again.is it just my TWINX1024-3200XLPRO which is faulty or what? Link to comment Share on other sites More sharing options...
Wired Posted November 14, 2004 Share Posted November 14, 2004 Change the RAS to CAS Delay to 3, see if that helps. Link to comment Share on other sites More sharing options...
chrisk Posted November 14, 2004 Author Share Posted November 14, 2004 I tried changing RAS to CAS to 3 and I am still having the same problem. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 15, 2004 Corsair Employees Share Posted November 15, 2004 Please set the Dim Voltage to 2.85 Volts and then test the modules one at a time with http://www.memtest.org. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.