Jump to content
Corsair Community

Commander mini and h100 problem.


Lokkeblomst

Recommended Posts

Hello guys..

 

I just bought the commander mini. The h100 is about 2 years old. but after install (2,7,5361) the software wanted to update the h100 so i did after that the fans go to 100% and stay there. Icant find the h100 in corsair link software. and the led on the commander mini is flashing red and green? i am' running win7 64 bit.

 

I have tryed disconnecting all fans and temp probes, no result

I have tryed software 2,6 and 2,5, no result.

I have tryed switching to another usb on my motherboard

 

Siv i saying

http://forum.corsair.com/v3/attachment.php?attachmentid=20249&stc=1&d=1419936808

http://forum.corsair.com/v3/attachment.php?attachmentid=20250&stc=1&d=1419936808

http://forum.corsair.com/v3/attachment.php?attachmentid=20251&stc=1&d=1419936808

1141896683_Skrmbillede2014-12-3011_50_29.thumb.png.5f28dbaff7dd7b6397836090869fef83.png

344480905_Skrmbillede2014-12-3011_51_47.thumb.png.1364a028310f298a6009537f6a832011.png

771332724_Skrmbillede2014-12-3011_52_17.png.c165d5d8ad54b6e05f63d564e739bba2.png

Link to comment
Share on other sites

How is this stuff connected?

 

You cannot connect the H100i and the Commander mini to the motherboard at the same time. It is best to connect the Commander Mini to the motherboard then connect the H100i to the Commander Mini via the link cable that was included with the Commander mini.

 

Then uninstall the software, Delete the Corsair folder from C:\Users\username\AppData\Roaming\Corsair then reinstall the software and reboot

Link to comment
Share on other sites

You cannot connect the H100i and the Commander mini to the motherboard at the same time. It is best to connect the Commander Mini to the motherboard then connect the H100i to the Commander Mini via the link cable that was included with the Commander mini.

 

The H100i and Commander Mini should still work in the LINK software if they are both individually connected via USB to the motherboard.

Link to comment
Share on other sites

I've got another problem with my commander:

The H100i were connected to the commander and he was connected to the mainboard.

Then I made an update for the H100i via Corsair Link and now the Commander is also shown up as a H100i in Corsair Link.

Now I've connected both seperately to the mainboard. The real H100i works great.

The commander is still shown as a H100i.

I use Corsair Link v.2.7.5361.

 

Now my question is: How can I flash the FW of the commander mini ? I've installed Corsair Link v.2.4.511 because there you can enter a FW file by yourself but I don't know where I can find the file to enter.

 

Please help me fast.

Link to comment
Share on other sites

The Commander mini firmware is 1.1.6. I do not believe there are any other firmware.

 

With Corsair Link v.2.7.5361 installed, navigate to Options, devices, then select Check for updates. It should auto update all Link devices.

 

Do you think I can't do this ? I made this not only once but it says there is nothing to update and this I can understand because: the commander shows himself as H100i and it's updated with the 1.0.7 so Link thinks nothing to update....

But I want to flash the Commander with it's own firmware by my self. I downloaded Link 2.4.5110 where you can update manually but there I have to enter a firmware file and I don't know where to get the Commander Mini firmware...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...