Jump to content
Corsair Community

Corsair XMS 3200 PRO DUAL KIT 2*512MB


Recommended Posts

I think I have a problem with my memory. The bad thing is that one of the modules sygnalized always full activity of memory banks - always lights all of leads. Memory works well and there is no more problems. I have motherboard ABIT NF7-S rev. 2.0 and timings are set to default. Is there any way to make RMA in Europe if I bought these modules in USA? I live in Poland and process of RMA will be very expensive to me (shipping cost etc...). Maybe there is something like "small program in EPROM" and maybe i can repair it myself. Please help Me.



Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest BIOS for your MB and load Setup/Optimized default settings, and try the following BIOS settings;

TwinX1024 or TwinX512-3200LL

CPU Freq: 133/166/200 (depending on the CPU FSB)

Memory Frequency: 100%

Resulting Frequency: 133/166/200 (depending on the CPU FSB)

Memory Timing: User Define

SDRAM CAS Latency: 2T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 2T

SDRAM Active to Precharge Delay (tRAS): 6T

DDR Reference Voltage: 2.7 Volts

AGP Voltage: Default *unless you have ATI (9200 or 9600) or NVIDIA (5200 or 5700) then 1.6 Volts suggested!*

All other settings are motherboards defaults

Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...