okle001 Posted November 14, 2004 Share Posted November 14, 2004 hello as soon as I got 1024-3200c2pro I have had nothing but trouble, I am getting BSOD/restarts and fails memtest. I have adjusted dimm vaults to maximum 2.8 Tried adjusting cas latency Disabled video and system cache Updating bios Updating chipset driver Bought another motherboard Tried a different PSU Unplugged all unnecessary devices. i have even sent away for replacement and the same problem occured. i cannot get this ram to work on a dual channel motherboard with a cpu higher than 3.0ghz, i have tried on four different dual channel boards and wont work. when i tried in two other single channel mobos they work perfectly. ive been pulling my hair out for 3 months now HELP........ windows xp pro SP2 Intel P4 3000mhz 800mhz fsb (First mobo) Asus P4c800 e-deluxe (second mobo) Abit IS7 Geforce fx 5600 256mb Western digital 80gb Creative sound blaster Link to comment Share on other sites More sharing options...
okle001 Posted November 20, 2004 Author Share Posted November 20, 2004 Anyone ???????? Link to comment Share on other sites More sharing options...
Wired Posted November 20, 2004 Share Posted November 20, 2004 It was posted in the wrong section; I have moved it to the correct one. Are you OC'ing it at all? Link to comment Share on other sites More sharing options...
okle001 Posted November 21, 2004 Author Share Posted November 21, 2004 It was posted in the wrong section; I have moved it to the correct one. Are you OC'ing it at all? no. i have followed the ramguys instructions and still no good :[pouts: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 22, 2004 Corsair Employees Share Posted November 22, 2004 Please make sure that you have the latest BIOS for your MB and load Setup/optimized default settings, and try the following BIOS settings; TwinX1024 or TwinX512-3200C2 Advanced/Jumper Free AI over clocking: Manual CPU Freq: 200 DRAM Clock: 400 MHz Memory or Dim Reference voltage: 2.75 Volts System performance: Standard AGP Voltage: Default *unless you have ATI (9200 or 9600) or NVIDIA (5200 or 5700) then 1.6 Volts suggested!* Advanced/Chipset Configure Dram timing by SPD: Disabled/User define SDRAM CAS Latency: 2T (2.5T AMD Platform) SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T SDRAM Burst Length: 8 Performance Acceleration Mode: Auto or Enabled USB Legacy Support: Disabled All other settings should be set to default settings! Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure! Link to comment Share on other sites More sharing options...
okle001 Posted November 23, 2004 Author Share Posted November 23, 2004 thanks but this is the third time youve given me these settings, i have tried these and more. oh by the way i went out and bought some generic 512 DDR400 pc3200 and works perfectly. i would have been better of buying cheap ram :sigh!: Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 23, 2004 Corsair Employees Share Posted November 23, 2004 Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.