Jump to content
Corsair Community

PAGE_FAULT_IN_NONPAGED_AREA ntoskrnl.exe


Recommended Posts

My problem:

 

PAGE_FAULT_IN_NONPAGED_AREA....ntoskrnl.exe :eek:

 

My setup:

ASUS A7N8X-X

AMD Athlon XP 2600+ (barton)

Corsair Platinum C2 PC3200 DDR

Maxtor 40 GB

Geforce 2 MX

 

Windows 2000 Pro SP4 (up-to-date) / Windows server 2003 <-- same partition. :p:

 

After running ok for 3 months, I got this error about 10 seconds after logging in: PAGE_FAULT_IN_NONPAGED_AREA.... ntoskrnl.exe. Safe mode works. Windows 2003 boots normally, MEMTEST 86 ran for 6 hours, without results. I searched every corner of google AND GoT. Nothing except people who kept telling me that my ram-bar had to be broken.

 

Please help me. I am on the edge of despair. :evil:

Link to comment
Share on other sites

  • Corsair Employees

Please make sure that you have the latest BIOS for your MB and load Setup/Optimized default settings, and try the following BIOS settings;

TwinX1024 or TwinX512-3200C2

CPU Freq: 133 MHz (266 FSB)

System Performance: User Define

Memory Frequency: 125%

Resulting Frequency: 166 MHz (333 FSB)

Memory Timing: User Define

SDRAM CAS Latency: 2.5T

SDRAM RAS to CAS Delay (tRCD): 3T

SDRAM Row Precharge (tRP): 3T

SDRAM Active to Precharge Delay (tRAS): 6T

DDR Reference Voltage: 2.7 Volts

AGP Voltage: Default *unless you have ATI (9200 or 9600) or NVIDIA (5200 or 5700) then 1.6 Volts suggested!*

All other settings are motherboards defaults

Then please test them one at a time with http://www.memtest.org and let’s make sure it's not some other issue! I would run the test for at least 2-3 passes to be sure!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...