10000+ errors with memtest.. xms3200pro

[Nozzer]

I have had this memory for just over a year (TwinX 1024-3200C2Pro) and bit by bit i have started to get errors with it, to the degree that windows will not load properally and firefox causes errors thus will not open.

 

I have tested the modules both in my PC and a friends to make sure.. Im on Nforce 2 and he VIA chipsets.

 

I have ran at stock settings, with timings of 2.5/3/3/6 and even 3/4/4/8 and still one of the two modules bring up faults, the other module is fine. How do i stand with an RMA to corsair being in the UK? Also how long will it take etc, just general questions for a novice at RMA procedures.

 

Thanks

Noz

[RAM GUY]

Can you tell me the make and model of MB you have along with the CPU speed and it’s FSB as well? In addition, please tell me the bios settings you have set for both CPU and memory and any performance settings that you may have set?

[Nozzer]

My system =

NF7-S with mobile 2400 processor at stock (200x 10- 2000Mhz)

 

His

Abit KV8Pro with A64 3200 at stock also (200x 10- 2000Mhz)

 

Timings were both 2.5/3/3/6 and 3/4/4/8 in both systems, even tired 2.5/3/3/11 in my board. Volts were 1.75v Vcore, 2.7v Vdimm up to 2.85v with no change in errors. Timings were set to speed but then manual to change to higher timings, Its not the boards or settings as when i test the 2nd stick with the same timings and volts there are no errors, its only with the single stick it errors on me.

 

Do you need any other info?

 

Thanks again for your help

Nozzer

[RAM GUY]

Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!