Ricey Posted November 11, 2004 Share Posted November 11, 2004 Hi there, Need to have a stick from the TwinX RMA'ed. Ran Memtest 3.1A with one of the sticks included in the TwinX pack. Received over 100+ errors at auto 2.5-3-3-8 timings and 2.6v. Observed several hard reboots within WinXP and crashes within games(MMO Betas). The other stick is free of errors and works fine (currently using that 1 stick). Eric Link to comment Share on other sites More sharing options...
Wired Posted November 11, 2004 Share Posted November 11, 2004 Try setting the voltage to 2.75v (or 2.8v). What motherboard / CPU / FSB do you have? Link to comment Share on other sites More sharing options...
Ricey Posted November 11, 2004 Author Share Posted November 11, 2004 I'm using a Albatron KX800 Pro II Amd64 Board. I'll give 2.75v a try. Link to comment Share on other sites More sharing options...
Wired Posted November 11, 2004 Share Posted November 11, 2004 What CPU / FSB do you have? Link to comment Share on other sites More sharing options...
Ricey Posted November 12, 2004 Author Share Posted November 12, 2004 ok, tested the bad stick with 2.8v at auto 2.5-3-3-8. Received over 300 errors by test #4 in Memtest 3.1 at the same 2 addresses=0001a876554 - 424.3mb & 0001a8f6514 - 424.3mb. My cpu is a Athlon 64 3200+ (130nm) at stock FSB and 1600 Hypertransport. CPUZ: HTT=201.4mhz x 10 Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 12, 2004 Corsair Employees Share Posted November 12, 2004 Moving to Warranty Questions! Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.