Jump to content
Corsair Community

Intel D925XCV with 2 Twin2X CM2X512 kit


Recommended Posts

I think the partnumber is TWIN2X1024-5400C4, that's what it says on the back of the package. In the Intel Bios (v. 338) under Advanced - Chipset configuration - Memory - SDRAM Control, I set the value to Manual - User Defined. Then I put in 667MHz and 4-5-5-15. I leave CPC Override at Auto and change DDR2 Voltage to 2V, also tried 1.95. Tried a few other settings as well, no luck though. The machine does post (incorrect info in my previous mail), but as soon as the Windows XP logo shows up, it re-boots. Everything runs very stable with the Bios Auto settings.



Link to comment
Share on other sites

  • Corsair Employees

We can try replacing your modules if you like, but more than likely it's the MB, as not many Intel MB's will over clock as well as some of the other makers who cater to the enthusiast.

Please follow the link in my signature “I think I have a bad part!” and we will be happy to replace them or it!

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...