PankyBoy Posted November 8, 2004 Share Posted November 8, 2004 A question to the Pros The TWIN2X1024-4300C3 specs state "Tested at 3-3-3-8 latency settings at1.8V" The D925XECV2 motherbord spec state "1.8 V and 1.9 V DDR2 SDRAM DIMMs * 3-3-3 memory timing with 1.9 V DIMMs" (http://www.intel.com/design/motherbd/cv2/cv2_mem.htm) There is a voltage difference 1.8 - 1.9 between the recommendations IS THIS BAD ??? Any suggestions to solve the issue will be welcomed Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 9, 2004 Corsair Employees Share Posted November 9, 2004 I would suggest you use another make of MB if you want to use these modules. I am sorry but the Intel version of the MB may not offer all of the settings needed to properly run the modules. You are welcome to try it, but if it does not work properly, I would suggest relaxing the timings! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.