Universe555 Posted November 8, 2004 Share Posted November 8, 2004 I have the Asus P4C800-e Deluxe and 1GB TWINX1024-3200C2PT. I have attempted to put the mobo in Turbo mode and it locks during post. The folks at Asus suggested I set the timings manually and also said to contact you as you do extensive compatibility testing. So... 1) What timings do I enter? 2) Are there any other changes I need to make in the bios to hit the sweet spot for my memory. Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 8, 2004 Corsair Employees Share Posted November 8, 2004 Turbo mode will try and run the modules out of spec. please use the following settings after you load setup defaults. Under Jumper Free AI Over Clock Tuner: Manual CPU Freq:200 DDR Freq: 200MHz 400DDR DDR Voltage: 2.75 Volts System performance: Auto Under Advanced Chipset Memory timings: Manual DRAM Clock: 200 MHz SDRAM CAS Latency: 2T (2.5 on AMD platform) SDRAM RAS to CAS Delay (tRCD): 3T SDRAM Row Precharge (tRP): 3T SDRAM Active to Precharge Delay (tRAS): 6T SDRAM Bank Interleave: 4 Bank All other settings are motherboard defaults. Link to comment Share on other sites More sharing options...
Universe555 Posted November 8, 2004 Author Share Posted November 8, 2004 Thank you for the comprehensive answer. My mobo supports PAT... can I enable it? Thanks. Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 8, 2004 Corsair Employees Share Posted November 8, 2004 I would leave that to AUTO and test you system. If it's stable then set the performance mode to standard that will force PAT to be enabled. Link to comment Share on other sites More sharing options...
Universe555 Posted November 8, 2004 Author Share Posted November 8, 2004 Where do I get a Corsair sticker for my case? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 9, 2004 Corsair Employees Share Posted November 9, 2004 Please email me with your contact info and that you want a case badge and I will get you one. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.