paulb Posted November 8, 2004 Share Posted November 8, 2004 I have a P5DG2 D Motherboard from asus and i am trying to use VS1GB533D2 with it but things just arent woking out Whats the proper voltage and timing settings for this set up? Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 8, 2004 Corsair Employees Share Posted November 8, 2004 I would reset or clear the bios and then turn it on and enter the bios and load setup defaults and then set the timings manually to the tested settings. CPU External Frequency: Manually set to 200MHz DDR2 SDRAM Clock: Manually set to 533MHz DRAM Timing Selectable: Auto Yields the following timings SDRAM CAS Latency: 4T SDRAM RAS to CAS Delay (tRCD): 4T SDRAM Row Precharge (tRP): 4T SDRAM Active to Precharge Delay (tRAS): 12T DDR2 SDRAM Voltage: 1.9 NB Voltage 1.9 Volts (On Abit AA8 Only) All other settings are motherboard defaults. Maximum DDR2 recommended VDIMM: 2.1 Volts Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.