Jump to content
Corsair Community

Problem with a K8N Neo2 Plat and TWINX512-3200C2PT, any ideas?


Anavel

Recommended Posts

Greetings all,

 

I just upgraded my CPU and mobo to a new MSI K8N Neo2 Platinum and AMD 64 3500+. When I brought over my trusty sticks of TWINX1024R-3200C2 there was no problem running them in single channel mode, however, every configuration I try to run in double channel mode is met with the system not posting with repeated long beeps.

 

I am running the memory in the 2.5, 3, 3, 6 at the auto voltage, which I think is 2.55v. Any suggestions you have would be appreciated. Thanks for your time.

 

A

Link to comment
Share on other sites

Thanks all for the quick response. Unfortunately, I messed up on the model number of the ram. In fact I am running TWINX1024-3200C2PT, not the R version I indicated. I am once again sorry for the confusion. The good news is that the SATA raid was not working either, so the mobo was replaced, and all is well now. Ok, most is well now. Trying the 1.36 version of the bios to see if it fixes my raid problem, but I digress.

 

Thanks again for your time.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...