gr8sho Posted October 1, 2014 Share Posted October 1, 2014 I've been unable to get any of the last four releases of CL to work under Windows XP. My H100i is at firmware level 1.07. I want to confirm this is mission impossible, or, what a working combination is. Thank you. P.S. This is not my main system, but I'm keeping it around for running some 1990s vintage software that doesn't work under newer supported OSes. Link to comment Share on other sites More sharing options...
Toasted Posted October 1, 2014 Share Posted October 1, 2014 The LINK software does not support Windows XP. Link to comment Share on other sites More sharing options...
gr8sho Posted October 4, 2014 Author Share Posted October 4, 2014 Okay, Thanks. Was there ever a past version that supported XP, perhaps one of the first versions, or somehow CL was just never supported on XP. Link to comment Share on other sites More sharing options...
red-ray Posted October 4, 2014 Share Posted October 4, 2014 I expect my SIV (http://rh-software.com/) will report your H100i on Windows XP. You need to exit CL before running SIV as CL fails to interlock hardware access, so I had to made SIV detect is CL is running and if so disable it's CL hardware reporting. Link to comment Share on other sites More sharing options...
Toasted Posted October 5, 2014 Share Posted October 5, 2014 Unfortunately, the early versions of LINK software where the H100i was supported did not support Windows XP. Link to comment Share on other sites More sharing options...
Tarnum Posted December 31, 2014 Share Posted December 31, 2014 Is there a version of Corsair Link software compatible with Windows XP Professional x86 (32-bit)? Just curious. Got an AX1200i PSU. Thanks for the reply. Link to comment Share on other sites More sharing options...
Toasted Posted January 1, 2015 Share Posted January 1, 2015 No, even if there was a version which supported XP, i doubt it would have supported a AXi PSU. As mentioned below, you can give SIV a try. That may work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.