BIOS RAM settings

[Gerg]

I have an Abit Av8 mobo with TWINX1024-3200XLPRO RAM.

 

My BIOS settings are as follows:

 

DRAM Command Rate: 1T

CAS Latency Time: 2.0

RAS# to CAS# Delay: 2 clocks

Min. RAS# Active Time: 5 clocks

Ras# Precharge Time: 2 clocks

Row Cycle Time: 11 clocks

Row Rerfresh Cycle Time: 14 clocks

RAS# to RAS# Delay: 2 clocks

Write Recovery Time: 3 clocks

Write to Read Delay: 2 clocks

Read to Write Delay: 3 clocks

 

RAM Guy could you please check if these settings are correct.

Thanks a million.

[RAM GUY]

DRAM Command Rate: 1T

CAS Latency Time: 2.0

RAS# to CAS# Delay: 2 clocks ( If the system is not stable try "3")

Min. RAS# Active Time: 5 clocks

Ras# Precharge Time: 2 clocks

Row Cycle Time: 11 clocks (Should set to Bios default)

Row Rerfresh Cycle Time: 14 clocks (Should set to Bios default)

RAS# to RAS# Delay: 2 clocks (Should set to Bios default)

Write Recovery Time: 3 clocks (Should set to Bios default)

Write to Read Delay: 2 clocks (Should set to Bios default)

Read to Write Delay: 3 clocks (Should set to Bios default)

 

And your Dim Voltage should be set to 2.8 Volts!