eLN_No Posted November 1, 2004 Share Posted November 1, 2004 Ok I built my VERY FIRST COMPUTER I need to know the ram timings for [Corsair CMX512-3200XLPT 512MB DDR400 XMS3200 Xtra-Low Latency Memory w/Platinum Heat Spreader Retail] and if it has any problems with compatibility with ABIT KV8-MAX 3 and SAPHHIRE RADEON 9800 ATLANTIS. I need help because I keep getting a "dumping physical memory" uninstalling or installing it doesn't ALWAYS happen but I am wondering what else I need to set correctly before FULLY running the computer. I do have all the bios updated and all I think I need is compatibility issues and the timings or persay dunno. thanks for the help Link to comment Share on other sites More sharing options...
Corsair Employees RAM GUY Posted November 1, 2004 Corsair Employees Share Posted November 1, 2004 Please make sure the modules are in slots 2-3 or 1-3 and you have the latest bios version installed. Then set the Dim Voltage to 2.7 Volts and then test the system with http://www.memtest.org, if you still get errors please test them one at a time and please do not set any of the performance options in the bios. Link to comment Share on other sites More sharing options...
Wired Posted November 2, 2004 Share Posted November 2, 2004 If all of that passes, try these timings: SDRAM CAS Latency: 2T SDRAM RAS to CAS Delay (tRCD): 2T SDRAM Row Precharge (tRP): 2T SDRAM Active to Precharge Delay (tRAS): 5T SDRAM Bank Interleave: 4 Bank All other settings are motherboard defaults. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.