match Posted September 8, 2014 Share Posted September 8, 2014 So I'm trying to change the colors in the utility that came out today and it prompt me to update the firmware at first so i did. But the problem here is when i try to change the color of backlight it stays at default and nothing happens... Any ideas? I tried exporting and importing but to no avail. Edit: I did create profiles and the color changes in the software but it did not show on the keyboard Link to comment Share on other sites More sharing options...
BillRathbone Posted September 8, 2014 Share Posted September 8, 2014 You need to make the Profile you are editing the "Default Profile" : Right-click on the "menu" icon to the right of the Profile name, then select "Set As Default Profile" from the menu. Link to comment Share on other sites More sharing options...
BillRathbone Posted September 8, 2014 Share Posted September 8, 2014 You can also activate a profile from the System Tray. Link to comment Share on other sites More sharing options...
match Posted September 8, 2014 Author Share Posted September 8, 2014 You can also activate a profile from the System Tray. Thanks guys i figured out how to use the software Link to comment Share on other sites More sharing options...
bmarino27 Posted September 8, 2014 Share Posted September 8, 2014 Thanks guys i figured out how to use the software I havent. Im trying to add a ripple effect. I cant seem to figure out how. I add the effect and the lights flash but nothing happens. I cant seem to figure it out. Link to comment Share on other sites More sharing options...
Corsair Employees Corsair Shaman Posted September 9, 2014 Corsair Employees Share Posted September 9, 2014 First we need to make sure that you're under default profile. Select the Profile, choose the Mode by dragging the mode to the top and set this profile as default. The attached picture shows "Diablo 3" as profile and "Barbarian" as the active mode. Are you trying to add the ripple effect to the background lighting or to the macro key? If it's for background lighting, please make sure you edit the group by right clicking the assigned group, "edit light", check "start", deselect "on key press" and "end" then "ok". This will start the background animation. If it's the macro key, make sure you select the ripple effect you created under "Lighting When Start" in Actions Editor. Link to comment Share on other sites More sharing options...
Stoggy26 Posted September 9, 2014 Share Posted September 9, 2014 I got a question for you how do u remove a lighting effect from a profile Link to comment Share on other sites More sharing options...
iky Posted September 9, 2014 Share Posted September 9, 2014 if you're meaning what i think Stoggy, you just right click the highlighted key(s) or group you want to clear and near the bottom of the drop down menu there is a "clear" option. that'll clear any lighting effects on the selected key(s). Link to comment Share on other sites More sharing options...
Stoggy26 Posted September 9, 2014 Share Posted September 9, 2014 [ame] [/ame] Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.