istari675 Posted September 7, 2014 Share Posted September 7, 2014 I have an H80i and I am having some issues with keeping a 4 pin connector on the board for it. The pump plugs into the PSU through a normal SATA power cable. Does the pump just need to get power through one of these plugs or do I need to have them both plugged in to be functional? I would test it myself but I would hate to damage my CPU because of overheating if it were to not work. Link to comment Share on other sites More sharing options...
wytnyt Posted September 7, 2014 Share Posted September 7, 2014 the h80i only needs sata power to function,,,the 4 pin tach connects to cpu-fan to prevent a boot fan error which can be turned off in bios if desired... Link to comment Share on other sites More sharing options...
istari675 Posted September 7, 2014 Author Share Posted September 7, 2014 Thank you! Link to comment Share on other sites More sharing options...
wytnyt Posted September 7, 2014 Share Posted September 7, 2014 anytime if there's any further questions,feel free to post... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.