Jump to content
Corsair Community

Can't change h80i LED through link software


Recommended Posts

  • Corsair Employees

Go to Options - Devices and check if the H80i is listed there. If not, ensure that:


1. your H80i is connected to a power source via the SATA connector

2. the supplied USB cable (mini-B to 9-pin USB internal connector) is connected to the pump and motherboard

3. you have the latest USB drivers


If all of that checks out, try the following:


1. Try a different internal USB header

2. Connect the pump to an external USB port using a USB mini-B to USB-A cable (same cable used to charge a PS3 controller)

3. Last resort: uninstall your current Link and install 2.5.5145

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...