Ochipala Posted August 20, 2014 Share Posted August 20, 2014 im using windows 7 64bit im using corsair h100, and eversince i install this update, my commander been blinking red after every 2 seconds. and i wish to revert to the old version but i can't seem to find it in the forums anymore. whenever i update, it ask my cooling node and h100 to update to v1.2.8 it keeps asking to update "unknown node(automatic recovery) -> 0.0.0 it detects h100 and the corsair cooling node, but i cannot control the fans of the h100. can't seem to find h100 or the fans that are connected to the cooling node it on "devices" tab. is there any way to find the old software version of corsair link commander? please help. Link to comment Share on other sites More sharing options...
thenosbod Posted August 20, 2014 Share Posted August 20, 2014 http://forum.corsair.com/forums/showthread.php?t=125350 Link to comment Share on other sites More sharing options...
SpDFrek Posted August 20, 2014 Share Posted August 20, 2014 Do you have a original H100 or H100i? I am guessing from the firmware version its a original H100. If it is asking you to update the firmware from version 0.0.0 the flash has failed and you should go through the recovery process to flash the firmware again otherwise the software is not going to see it. Link to comment Share on other sites More sharing options...
Ochipala Posted August 20, 2014 Author Share Posted August 20, 2014 yeah, im trying to flash it back, but it seems i can't find the old version in this forum anymore. can't seem to download anything from http://forum.corsair.com/forums/showthread.php?t=125350 all the links seems to give me timeouts only. Link to comment Share on other sites More sharing options...
wytnyt Posted August 20, 2014 Share Posted August 20, 2014 yeah, im trying to flash it back, but it seems i can't find the old version in this forum anymore. can't seem to download anything from http://forum.corsair.com/forums/showthread.php?t=125350 all the links seems to give me timeouts only. i just d/l 3 versions just now so the timeouts is on your end try again... Link to comment Share on other sites More sharing options...
Ochipala Posted August 21, 2014 Author Share Posted August 21, 2014 this is utter rubbish. the best i can do is use RC-v2_6_5214 to control my cooling node. i totally cannot control my h100 at all. is there anybody else out there that still uses h100? and not h100i that can help me? btw, i have install and uninstall EVERY single version that is on this link. and none work for my h100 http://forum.corsair.com/forums/showthread.php?t=125350 Link to comment Share on other sites More sharing options...
LicSqualo Posted August 21, 2014 Share Posted August 21, 2014 @Ochipala For my H100, I'm (roll back and) running on the 2.4.5065 version of Corsai Link. This is a good version for my sistem (1x H100, 1x Cooling and 1xlightning node) to control every fans(4xh100 and 3xcooling node), useful temp sensors(4) and lights(2), all working as indeed. The last two version of 2.7 have caused me a wrong firmware update (and I have also tested the 1.2.8 version for the H100 but this last version don't work better as the 1.1.12). Link to comment Share on other sites More sharing options...
Ochipala Posted August 22, 2014 Author Share Posted August 22, 2014 @LicSqualo thanks for the info on the update, im able to control all 4 fans in my h100. i guess corsair doesnt care about us h100 users and rather care about h100i users instead. oh wells. Link to comment Share on other sites More sharing options...
wytnyt Posted August 22, 2014 Share Posted August 22, 2014 @LicSqualo thanks for the info on the update, im able to control all 4 fans in my h100. i guess corsair doesnt care about us h100 users and rather care about h100i users instead. oh wells. i think the h80 and h100 is limited to the software produced in its ''time'',the I models is the new revision and like most revised hardware isnt backward compatible ... Link to comment Share on other sites More sharing options...
LicSqualo Posted August 23, 2014 Share Posted August 23, 2014 @Wytnyt: thanks for the info! For your memory: we have buy this hardware with a "RC" software until now... Perhaps, should be write or clearly indicated for this product, because isn't a "good" surprise... @Ochipala Fortunately Corsair (I hope) don't forget the users... I'm looking forward for a stable or definitive version. In my case the only problem with the 2.4.5065 is the random crash. Killing the "Hardware" monitor process of CL and restart solved partially the problem waiting a new release. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.