Broewly Posted August 13, 2014 Share Posted August 13, 2014 Hey, I built my PC last year and got in overclocking 2 weeks ago, and since then im always looking at my CPU temprature. I`ve noticed that the temprature rises up to high 80s @4.7Hz@1.275v :eek:. I always tweaked the overlock a bit because i thougth it was a bad oc, after a while i took the oc off abd run it on stock again and while in idle sometimes the temp rises to mid 50s. I reapplied the cooler block with arctic silver 5 and the temp did not change at all. Corsair link doesn`t recognize the h100i anymore after i installed an update, and i cant get it to install the drivers for the usb header. Is it broken ? I can feel very little vibraiton but it could be from the graphics card. I will check the UEFI/BIOS if it detects the h100i usb. Sorry for my bad english its not my native language :) Link to comment Share on other sites More sharing options...
wytnyt Posted August 13, 2014 Share Posted August 13, 2014 4.7 is a rather high oc for a 3770 cpu using a all in one hydro,,,if i were to guess id say youve degraded the cpu and its adding additional heat in order to function,,,assuming of course the paste is spread good and dropping the clock cools it down... you also may have a setting in your oc affecting temps... Link to comment Share on other sites More sharing options...
Broewly Posted August 14, 2014 Author Share Posted August 14, 2014 4.7 is a rather high oc for a 3770 cpu using a all in one hydro,,,if i were to guess id say youve degraded the cpu and its adding additional heat in order to function,,,assuming of course the paste is spread good and dropping the clock cools it down... you also may have a setting in your oc affecting temps... i took it off when i saw the temps.... and i saw guys running a 4.7@1.35v and it run just fine. I will mount the stock intel cooler an look if the temps are around the same if yes i am quit sure its broken... Link to comment Share on other sites More sharing options...
wytnyt Posted August 14, 2014 Share Posted August 14, 2014 id go back to a factory bios and if its cool,then retweak the bios for your oc.. also cpu's vary while one clocks easy,,others will not Link to comment Share on other sites More sharing options...
HOODedAssault Posted August 16, 2014 Share Posted August 16, 2014 Sorry to say but nobody runs 1.35v on 3770k safely on a hydro cooler. Well they'll be hitting 100 under load at least. Their cpu not mine lol. Link to comment Share on other sites More sharing options...
snapper69 Posted August 21, 2014 Share Posted August 21, 2014 Was the update that you installed a firmware update from 1.05 to 1.07? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.