Even Posted August 11, 2014 Share Posted August 11, 2014 Hi folks, i'm using this AiO cooler and it's doing is job pretty well. Still, it's been some time since i updated my corsair link software and since then my LED color it's all messed up, forcing me to keep it white. If i set it Blue once the pc shut off (not restarting, it have to be completely shut uff), on the next boot it'll be purple-ish, when checking Corsair LINK it tells me it's Blue, yet i see it purple. What's going on? Link to comment Share on other sites More sharing options...
orte7e Posted August 11, 2014 Share Posted August 11, 2014 Hi, open up your corsair link hardware monitor and click on the h80i led 1 and you will see to the right configuration for your lighting on the water block Adjust to whatever color you want to 255 and the other colors to 1 or 2 and Save it, see if that will work for you. Works for me and I have not had any trouble since. Good luck let me know how it goes. Link to comment Share on other sites More sharing options...
orte7e Posted August 11, 2014 Share Posted August 11, 2014 Forgot to mention reboot your pc after you set your colors. Link to comment Share on other sites More sharing options...
orte7e Posted August 11, 2014 Share Posted August 11, 2014 If that doesn't work shut down wait a few then restart pc. Also I am using corsair link version 2.4.5110 and everything seems to be fine. Link to comment Share on other sites More sharing options...
Even Posted August 12, 2014 Author Share Posted August 12, 2014 Woah, thanks man, it worked. I owe you one Link to comment Share on other sites More sharing options...
orte7e Posted August 12, 2014 Share Posted August 12, 2014 Your Welcome. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.