ChuckCrsrForums Posted July 30, 2014 Share Posted July 30, 2014 Hello and thanks in advance for your help. I have the Dominator GT 8 gig kit CMT8GX3M2A2000C9 and would like to know if this will work well with the new Intel Z97 chipset-these are 1.5 volt modules and I haven't found any specifics about what the Z97 boards requirements are. in terms of DDR3 voltage. Thanks......Chuck Link to comment Share on other sites More sharing options...
jameyscott Posted July 30, 2014 Share Posted July 30, 2014 1.5 or even up to 1.65v will be just fine on the z97 platform. Link to comment Share on other sites More sharing options...
Nicknas Posted July 31, 2014 Share Posted July 31, 2014 1.5 or even up to 1.65v will be just fine on the z97 platform. I have ram TR3X6G1600c8D That is 8 8 8 8 24 and 1.65v That can only run at 1333 and 1.49 or the system either will not Boot at all ( error 55 ) or instant BSOD as windows loads. Memory ran GREAT in my old system but seems like the voltage and timings are unusable in the Z97 These were 2 triple channel Kits to make 12gb 3x2 GB Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.