symphonia117 Posted July 24, 2014 Share Posted July 24, 2014 I just built a new rig. It is using a Corsair H80i on an Intel i7-4790k on an MSI Z97-GD65 board. I am experiencing two major problems with the H80 so far. First off, whenever the computer (windows 8.1) wakes from sleep, the fans connected to the pump kick on and turn up to max, where they then stay for the remainder of the computer's use until it is shut down or restarted. Additionally, when I try to use the Corsair link software, all of my hardware appears except for the H80 and anything affiliated with this. I need to ship this rig off soon, and don't really have time for delays, so any help would be vastly appreciated! Thanks! Link to comment Share on other sites More sharing options...
wytnyt Posted July 24, 2014 Share Posted July 24, 2014 your corsair link software faults when going into sleep mode as it requires a usb connection at all times and sleep mode turns this power off..you may be able to go in bios and have usbs stay hot all the time... Link to comment Share on other sites More sharing options...
symphonia117 Posted July 25, 2014 Author Share Posted July 25, 2014 The Link software doesn't work regardless of sleep. Even from a fresh boot, the corsair equipment doesn't show up in the software. Link to comment Share on other sites More sharing options...
koltz Posted July 29, 2014 Share Posted July 29, 2014 Hello, I have the same config on my rig, just put it together yesterday and have the same problem aswell, H80i works fine but doesn't appear on windows device manager nor Corsair Link software, Pump and fans work flawlessly but something is not working with the usb connector. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.