Jump to content
Corsair Community

Memory Test Displaying Errors?


jazzyman

Recommended Posts

I believe that I may have a problem with one or both CMX4GX3M2A1600C9 XMS3 memory modules?

 

My system sometimes runs very slowly and I have run a Memtest check on the system which is showing a number of errors. I have attached an image of these errors, please could someone confirm if I do have a problem with my memory?

 

If the memory is to be returned under warranty, do you return both of the memory modules?

memtest.jpg.ca5bd2b8f096551aca46e6f86e9196da.jpg

Link to comment
Share on other sites

I believe that I may have a problem with one or both CMX4GX3M2A1600C9 XMS3 memory modules?

 

My system sometimes runs very slowly and I have run a Memtest check on the system which is showing a number of errors. I have attached an image of these errors, please could someone confirm if I do have a problem with my memory?

 

If the memory is to be returned under warranty, do you return both of the memory modules?

 

if only one is bad,,you would still need to return the complete set whether its a 2pc set or 4pc set...

Link to comment
Share on other sites

I believe that I may have a problem with one or both CMX4GX3M2A1600C9 XMS3 memory modules?

 

My system sometimes runs very slowly and I have run a Memtest check on the system which is showing a number of errors. I have attached an image of these errors, please could someone confirm if I do have a problem with my memory?

 

If the memory is to be returned under warranty, do you return both of the memory modules?

 

Why do you think they are bad? May just be a bad OC!!!

Link to comment
Share on other sites

That's why I told him test 1 at a time. If both fail or both pass then it's likely an oc issue/bios setting. If 1 fails and 1 doesn't it tells you it's Def the ram.

 

I agree with you on that. He should also test @ stock speeds also if not already.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...