bbents Posted July 9, 2014 Share Posted July 9, 2014 Headset is flawless when connected with charging cable, but as soon as it is unplugged sound gets interrupted and crackly. I have tried with and without the drivers, the dongle is about 2 feet away, and with my router and phone turned off. I just bought these yesterday, and the initial charge was around 6 hours. When I unplugged them the light was green, but when I plug it in it blinks red. Any suggestions would be appreciated. Link to comment Share on other sites More sharing options...
sandstorm1 Posted July 9, 2014 Share Posted July 9, 2014 audio does not go through the cable, its just for charging. try the dongle in another usb port. I dont have any experience with the 2100 so someone else should be able to help you more than I can. Link to comment Share on other sites More sharing options...
bbents Posted July 10, 2014 Author Share Posted July 10, 2014 tried dongle in every USB port with and without extension. It's also no longer working with the charge cable plugged in. Opened an RMA, hopefully can get my money back as this headset is completely unusable. Link to comment Share on other sites More sharing options...
Eternalchaos Posted July 10, 2014 Share Posted July 10, 2014 I have been getting the same problem over the last couple of days, fingers crossed it is just the weather messing with the signal Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.