auridas330 Posted July 8, 2014 Share Posted July 8, 2014 I've been looking at a lot of builds with this cooling solution, but can i mount it on the top of my case, because the rear is being used as an exhaust in my case Link to comment Share on other sites More sharing options...
HOODedAssault Posted July 8, 2014 Share Posted July 8, 2014 Don't see why not as long as the tube length reaches that position. Link to comment Share on other sites More sharing options...
auridas330 Posted July 8, 2014 Author Share Posted July 8, 2014 I read the .pdf manual and it says that corsair recomend that the tubes be at the bottom, so that confused me Link to comment Share on other sites More sharing options...
HOODedAssault Posted July 8, 2014 Share Posted July 8, 2014 That's because with the turning at the top of the rad with it mounted vertically there is a chance that air can get into the pump. With it mounted to the top it's very unlikely that air can be pushed downward toward the pump. Link to comment Share on other sites More sharing options...
auridas330 Posted July 8, 2014 Author Share Posted July 8, 2014 Thanks for the info, ill be picking it up then ;) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.