Bemyguest7 Posted July 3, 2014 Share Posted July 3, 2014 I'm planning to get the H80i (push/pull/exhaust) and mount to the rear of the case, will I have to remove my top 120mm Corsair AF fans (exhaust)? It looks tight for the fan closest to the rear. Thanks in advance for the help! Link to comment Share on other sites More sharing options...
Ahtlon Posted July 3, 2014 Share Posted July 3, 2014 If a h100i or h105 fits I would go with those , you need 6cm from top to motherboard, the h80i, is a nice cooler, it's cools the cpu fine, but if you have the room on top, I would say use the h100i or h105. With the h80i at the back, in push/pull, you have a cooler that's 88 mm thick at the back, and yes, I do think it would touch the last fan you mean. Link to comment Share on other sites More sharing options...
Bemyguest7 Posted July 3, 2014 Author Share Posted July 3, 2014 ya i saw a youtube vid that showed a spec 03 with a h100i...i don't see why it wouldn't fit in the spec 02. I'll have to take the heatspreaders off my corsair vengenance ram tho. Link to comment Share on other sites More sharing options...
Ahtlon Posted July 3, 2014 Share Posted July 3, 2014 The 3 and 2 should be the same inside, also a h100i looks much better in a case then a H80i,like I said , you need 6 cm from the top of your case down to your top of the mainboard, h100i is 30mm thick, fans are 25 thick, you can do push or pull with the H100i, but not push/pull together Link to comment Share on other sites More sharing options...
Ahtlon Posted July 3, 2014 Share Posted July 3, 2014 Keep in mind that you also have to watch out that the cooler don't interfere with your heat sinks on top of your mobo. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.