Granzon Posted July 3, 2014 Share Posted July 3, 2014 Hi I have a 250D. I have 2 noctua 120 side fans as an intake. The dust filter is so weak , that it also gets sucks in, and hit the center of the fans. Therefore creating a very annoying noise. Is there a plan to fix this issue? Link to comment Share on other sites More sharing options...
Ahtlon Posted July 3, 2014 Share Posted July 3, 2014 You mean the side filter, well you could use a Demciflex filter, they stick a bit better, but if you use 2 x 120 mm fans at the side and 140 in the front as intake, you can easily leave that filter out, because you would have a positive pressure and you would have almost no dust inside the 250D Link to comment Share on other sites More sharing options...
thenosbod Posted July 3, 2014 Share Posted July 3, 2014 Could you put one of these between the fan and the filter? http://www.overclockers.co.uk/showproduct.php?prodid=FG-005-GE&groupid=701&catid=2331&subcat=795 Link to comment Share on other sites More sharing options...
Ahtlon Posted July 3, 2014 Share Posted July 3, 2014 mmm, these are only a few mm thick, so it could work. try to put something between the filter and the fan that's about 3 mm( about the same as the fan guard and the fixing screws), if it goes between , it will work. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.