KrAzYtHeBoY Posted July 2, 2014 Share Posted July 2, 2014 Hello, im have H100i Using Corsair Link 2.6.5214 Beta on Windows 8.1. Im start Corsair Link software and select Led in "Normal mode" and select red color. OK. 1 --> Shut down CPU 2 --> Power on CPU 3 --> Load Corsair Link Software in taskbar 4 --> Led is white and not red colour. :\ problem? please solution! thanks Link to comment Share on other sites More sharing options...
wtootell Posted July 2, 2014 Share Posted July 2, 2014 Hello, im have H100i Using Corsair Link 2.6.5214 Beta on Windows 8.1. Im start Corsair Link software and select Led in "Normal mode" and select red color. OK. 1 --> Shut down CPU 2 --> Power on CPU 3 --> Load Corsair Link Software in taskbar 4 --> Led is white and not red colour. :\ problem? please solution! thanks I the same issue with mine but on Windows 7, I had to try a few different header plugs on my motherboard, a different cable, and several different versions of link software and firmware to get it to work. Im sure there is some kind of issue with the software not installing the USB driver properly and not fully communicating with the hardware. Another thing to try that works for me is boot into windows with the usb cable unplugged then plug it back in once you reach your desktop. Link to comment Share on other sites More sharing options...
KrAzYtHeBoY Posted July 3, 2014 Author Share Posted July 3, 2014 This problem is RGB bad reconized color. Im tested in configure in BLUE color and work fine, GREEN color and work fine per RED color this pump showing "WHITE" color... BAD SETUP: 50 - 0 - 0 (dark red) ---> pump reconized white color for SET RED COLOR configure colors RGB ----> 126 - 1 - 1 This RGB is 0 ---> not reconized! is a BUG in corsair link Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.