Rahul Rao Posted July 1, 2014 Share Posted July 1, 2014 I just installed h80i and its showing 42-44 degree idle temp and after 5 min of stress test with aida64 its shows 75-85 degree temp:mad:,coolent temp is 36 degree,ambient temp is 28,i checked all the connection and reseated the h80i but still getting that worse temp.i have cm storm scout 2 chassis and good airflow via 6 fans. Link to comment Share on other sites More sharing options...
Essoplerck Posted July 1, 2014 Share Posted July 1, 2014 I think its a problem with your thermal compound. Aslo what are your system specs? (CPU, and MoBo?) Link to comment Share on other sites More sharing options...
JDA50 Posted July 1, 2014 Share Posted July 1, 2014 I just installed an H80i last night in my sons computer... I am getting 39 to 41 degrees C at idle. I switched to performance mode to speed up the fans thinking the temp would come down and it stayed at about 40 degrees C. I'm not sure where it should be for optimum performance or where it will be when he uses if for his gaming and really puts the system under a big load. Any thoughts on this?? Link to comment Share on other sites More sharing options...
Rahul Rao Posted July 3, 2014 Author Share Posted July 3, 2014 i jst reseated h80i with arctic silver 5 and getting same temp,current idle temp is 40-44 degree...now what i do?:confused: my pc spec is: asus maximus 6 formula i7 4770k 16 gb corsair ram 2 tb hd geforce gts 450 cooler master v650 cm scout 2 cabinet with 6 fans Link to comment Share on other sites More sharing options...
Rahul Rao Posted July 3, 2014 Author Share Posted July 3, 2014 i m getting different cpu temp in corsair link and ai suite 3. see this screenshots: http://postimg.org/gallery/5o5axkqo/6c847907/ Link to comment Share on other sites More sharing options...
wiggle Posted July 6, 2014 Share Posted July 6, 2014 Sounds like the heat sink is not seated properly. Check the orientation of the back plate. (See Pic. http://cdn.overclock.net/a/a7/500x1000px-LL-a71b1057_backplate.png ) There are little 'notches' on the inside of 2 of the backing plate legs (circled). They are there to clear rivet/screw heads on the back of the CPU socket. Usually the 2 notches need to be orientated towards top as per supplied picture. Link to comment Share on other sites More sharing options...
Rahul Rao Posted July 27, 2014 Author Share Posted July 27, 2014 i don't know what is going on,i replaced the new h80i from corsair and the same thing is happening with this new h80i. my idle temp is 38c-43c degree,ambient temp is 32c,h80i pump temp is 36c degree and on 100% load it going 70c-78c degree can anyone please help me? Link to comment Share on other sites More sharing options...
wytnyt Posted July 27, 2014 Share Posted July 27, 2014 have or are you overclocked things? if so reset your bios as it may have a setting affecting temps Link to comment Share on other sites More sharing options...
Rahul Rao Posted July 28, 2014 Author Share Posted July 28, 2014 no overclocking,m running my pc on stock setting. Link to comment Share on other sites More sharing options...
wytnyt Posted July 28, 2014 Share Posted July 28, 2014 it can only be what wiggle suggested as theres really nothing else that can cause this... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.