Peep Posted July 1, 2014 Share Posted July 1, 2014 Having a problem with the CPU overheating running an H110 cooling system. After 2-3 minutes of idling the CPU hits 90 deg C and shuts down. This started out of the blue with no warning. It was idle in Windows and just overheated and shut down. The fan speeds and temp of the cooling unit are good. Circulation seems fine through the tubing and the radiator is ice cold. It is showing the pump spinning at an average of 8k rpm but temps keep climbing to 90 deg c and it shuts down. System specs are in my profile and it is about a year old. I would appreciate any help you could give me. Edit: The system isn't OC'd and never has been. Link to comment Share on other sites More sharing options...
jameyscott Posted July 1, 2014 Share Posted July 1, 2014 Just to make sure, the pump is plugged up, correct? You should be able to feel it vibrate when you touch it. If it is, then it might be a problem with your installation. Could you please take some pictures so that I can see how it is installed? Link to comment Share on other sites More sharing options...
Peep Posted July 1, 2014 Author Share Posted July 1, 2014 I'll try to get some pics. Thanks. Link to comment Share on other sites More sharing options...
Peep Posted July 1, 2014 Author Share Posted July 1, 2014 By "plugged up" what do you mean? It has worked fine for a year so it was installed properly. Unless you mean is there an obstruction? Link to comment Share on other sites More sharing options...
Peep Posted July 1, 2014 Author Share Posted July 1, 2014 Photos attached. Link to comment Share on other sites More sharing options...
HOODedAssault Posted July 1, 2014 Share Posted July 1, 2014 If the pumps spinning at 8000rpm it is done for. Link to comment Share on other sites More sharing options...
Peep Posted July 1, 2014 Author Share Posted July 1, 2014 Erghhhh. Guess it's time to RMA it. :( Link to comment Share on other sites More sharing options...
Peep Posted July 2, 2014 Author Share Posted July 2, 2014 If the pumps spinning at 8000rpm it is done for. What revs should it be spinning at? Link to comment Share on other sites More sharing options...
HOODedAssault Posted July 2, 2014 Share Posted July 2, 2014 I believe 1850rpm. Link to comment Share on other sites More sharing options...
thenosbod Posted July 2, 2014 Share Posted July 2, 2014 http://forum.corsair.com/v3/showthread.php?t=117385 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.