Ahtlon Posted June 26, 2014 Share Posted June 26, 2014 So looking at the internet for the size thread of the front fan screws, people are saying M4. So I measured them and they are 3.4mm thick, so they should be 6-32 unc or M3.5. Correct me if I am wrong. Want to order a 240 rad for in the front and use the holes and screw that come with the case, so the rad is going to be fixed at same holes as the fans are fixed now, this makes room on the bottom for the drain-port. Link to comment Share on other sites More sharing options...
LangZone Posted June 26, 2014 Share Posted June 26, 2014 6-32 is correct! Make sure to post some pictures when you're done, would be cool to see. Link to comment Share on other sites More sharing options...
TBrandes Posted June 28, 2014 Share Posted June 28, 2014 There's a simple trick to that: if it fits in a HDD ist a M4, if it fits in a drive for CD/DVD/Blu Ray its M3, eveything else is either something unusual or UNC. Never failed me here in Europe. ;) Link to comment Share on other sites More sharing options...
Ahtlon Posted July 3, 2014 Author Share Posted July 3, 2014 The 240 rad has to wait till the new 880GTX comes, don't want to buy a gpu heatsink now for the 780Ti, when at the end of the year the 880 is coming, so the 880 get a heatsink and the 240 rad also. So have to be patience, just like my 900D rma, Corsair is not to blame, the reseller and vendor are to blame, they are so slow with this rma, now in my second week. With Corsair there wouldn't be a problem and they are a lot faster then My reseller. But hey, nice weather here in Belgium, so my dog has the time of her life, playing with me, doing water games, ball games, even now she's looking if i want to play with her. Have to love her. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.