Jump to content
Corsair Community

P5Q3 Deluxe with cmz8GX3M2A1600C9


Roger552

Recommended Posts

Hey,

 

I have got a P5Q3 Deluxe Wifi ap on MB. (http://www.asus.com/Motherboards/P5Q3_DeluxeWiFiAP_n/)

I have got two older cm3x1024-1333C9DHX.

And I bought a new 8gb (2*4gb) kit (cmz8GX3M2A1600C9)

First, I remove the two old ram (cm3...)

And I reset the CMOS.

After reset, I put into the MB the two new 4gb moduls.

And I switch on the computer, and there's no beep and have black screen.

If i put the two old ram near to two new ram, I can reach the bios. (So have a normal VGA beep and have screen)

But with 4 modul ( two old 2gb and new two 4gb) the biso freeze after short time and windows won' start. But if I set the ram frequency to 800mhz, it works with two new ram with and without old rams. (But the system not too stable)

I try timing bios and set fsb 333mhz and I play with nb and ram voltage, how say Ram Guy in other posts.

And I have a latest bios update.

Oh, and I have got intel core 2 quad 2.83Ghz (q9505).

So what can i do?

Thanks in advance.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...