Jump to content
Corsair Community

Recommended Posts

GvO | 750D

 

My first liquid cooling/modding project.

 

Hardware:

CPU | i7 4770K

GPU | R9 290

RAM | 16GB PC3-12800 (DDR3-1600) CL9

SSD | 250GB SSD

PSU | 760W 80 Plus Platinum

 

Cooling:

CPU | EK-Supremacy Clean CSQ - Full Nickel

GPU | EK-FC R9-290X - Acetal+Nickel + EK-FC R9-290X Backplate - Black

RAM | EK-RAM Monarch X4 Clean CSQ Acetal + EK-RAM Monarch Module - Black

MF | EK-MOSFET ASUS M6G - Acetal+Nickel

SB | EK-SB ASUS M6G - Acetal+Nickel

 

RAD 1 | EK-CoolStream RAD XT (360)

RAD 2 | EK-CoolStream RAD XTX (240)

RES | EK-D5 X-RES 140 CSQ - Acetal

Pump | Aqua-Computer D5 pump with USB- and Aquabus interface

Fans | 7x Corsair SP120 PWM Quiet Edition 120mm

Controller | Aqua-Computer Aquaero 6 PRO

Sensors | 2x Aqua-Computer temperature sensor inline - G1/4 ID - 1x G1/4 OD

Tubing | Tygon R3603 - 7/16 ID - 5/8 OD - Clear

Cooling liquid | EK-Ekoolant Blood RED

Fittings | Bitspower Carbon Black

 

Plan:

  • Apply liquid cooling on all parts.
  • Delid and lap CPU.
  • Sleeve and manage all cables.
  • Cleanup the case with acryl, without modding the case it self.
  • Apply 'stealthmod' on the controller (and maybe a optical drive.
  • LED's to light up the case a bit.

Table of contents:

Topicstart GvO | 750D

A small update

Mounting block on GPU

Mounting block on RAM

Mounting blocks on MF, SB and CPU

 

Hardware pictures:

mobo.JPG

 

cpu.jpg

 

ram.JPG

 

gpu.JPG

 

ssd.jpg

 

psu.JPG

 

box.JPG

 

cooling.JPG

 

mdpc.JPG

 

mdpc1.JPG

 

case1.JPG

 

case2.JPG

 

mod1.JPG

 

mod2.JPG

 

mod3.JPG

 

mod4.JPG

 

mod5.JPG

 

mod6.JPG

 

mod7.JPG

 

mod8.JPG

Link to comment
Share on other sites

  • 2 weeks later...
  • 1 month later...

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...