MidnightNarwhal Posted May 30, 2014 Share Posted May 30, 2014 So I got some corsair SP 120 3 pin and the max RPM states it's 1450RPM. When I go in fixed mode, and set it to that, the fan go max to 1326RPM. Also if I set it to 0, it won't stop, the lowest it'l go is like 1200RPM. Is there a problem with this or what? Link to comment Share on other sites More sharing options...
Toasted Posted May 30, 2014 Share Posted May 30, 2014 Unfortunately, you cannot turn the fan "off". The Cooling Node does work with 3-pin fans but it will provide limited control, 4-pin fans are recommended as they work better with the node. Link to comment Share on other sites More sharing options...
MidnightNarwhal Posted May 30, 2014 Author Share Posted May 30, 2014 Unfortunately, you cannot turn the fan "off". The Cooling Node does work with 3-pin fans but it will provide limited control, 4-pin fans are recommended as they work better with the node. I see... I guess I will be better off plugging them in my Chasis fan and control them with fan xpert. Can I uninstall link and keep my settings on h100i? Like color led, etc. Link to comment Share on other sites More sharing options...
Toasted Posted May 31, 2014 Share Posted May 31, 2014 I'm not quite sure about the colour L.E.D. saving as i've seen reports that it doesn't save. You can uninstall it and see if the L.E.D. setting saves. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.