Jump to content
Corsair Community

H110 stock fans speeds is different


imjp

Recommended Posts

Hi to you all...Today i saw that one of my stock fans of my H110 runs at higher rpm that the other...I understand this because when i have my hand close to the fan with the lower rpm,i feel the air pushing inside the radiator is lower than the other fan..Also in bios i saw 2 reading about my cpu fans rpm..Cpu fan i think 1300-1500 rpm and alternative cpu fan is around 800 rpm...My H110 is on top and the fans is under the dust filter as intake to pull fresh air inside the case through the radiator like Corsair said on instuctions...So how can i make the 2 fans of my H110 run to the same speed?And one more thing..Room temps is 25-26C where my pc is..My 4770K temps on idle and at 3.5 stock speed is 30C and when i play demanding games the temps go to 50-55C max..This is normal temps for stock speed 4770K with H110???

 

4770K/H110/Asus v1 Hero/R9 290 Tri-X/750D Corsair with the 3 stock 140mm fans+1 120mm as intake on bottom,plug directly to my psu Corsair RM850

Link to comment
Share on other sites

Any help???I tested watch dogs for 1 hour and my 4770K with H110,go up to 55 celsius max...This is normal?I think this is high temps for 4770K to go 55 celsius with my H110...My rooms temerature is 28 celsius..What is your opinions dudes???
Link to comment
Share on other sites

55 isn't a bad temp at all for 28 degree ambient temp in the room. I have a h110 in a 750D with AF140's in push pull out of the top all under volted to 7volts. Prime 95 gets to 59 Celsius after 6 hours in a 25 degree room.
Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...