Jump to content
Corsair Community

New H60 owner :)


nuovo

Recommended Posts

Hello!

 

I recently purchased the new 2013 model of the H60 and so far I'm very happy. It's nice to see temps below 80c again.

 

I disabled the cpu q-fan control in the asus bios as advised from what I've read. I am curious though whether or not my fan and pump are running properly at max settings.

 

Ie; what's the max rpm of the fan and how can I be certain the pump is getting 12V? They are plugged into the only 3 and 4 pins available on my P8P67 board

 

http://puu.sh/8DOqs/0ff1b1c6f9.png

 

Thanks for your time and help

Link to comment
Share on other sites

Hello!

 

I recently purchased the new 2013 model of the H60 and so far I'm very happy. It's nice to see temps below 80c again.

 

I disabled the cpu q-fan control in the asus bios as advised from what I've read. I am curious though whether or not my fan and pump are running properly at max settings.

 

Ie; what's the max rpm of the fan and how can I be certain the pump is getting 12V? They are plugged into the only 3 and 4 pins available on my P8P67 board

 

http://puu.sh/8DOqs/0ff1b1c6f9.png

 

Thanks for your time and help

 

the rpms shown in the picture for your fan and the pump are OK!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...