TxLSkiller Posted May 6, 2014 Share Posted May 6, 2014 Hey leute Ich habe das gefühl das mit meiner h100i iwas nicht stimmt. Idl: CPU: 36-38° H100i(flüssigkeit): 28-29° Last(100% Prime): CPU:60-62° H100i(flüssigkeit):31-33° Ist das normal? ich habe heute sogar nochmal alles runter neue Wärmeleitpaste drauf aber hat sich nichts geändert. Mfg Manuel Link to comment Share on other sites More sharing options...
Crash-Over Posted May 6, 2014 Share Posted May 6, 2014 mit welchem tool ausgelesen "corsair link" !!!! wenn ja dann stimmen die cpu daten nicht am besten mit core temp oder hw monitor auslesen lassen Link to comment Share on other sites More sharing options...
TxLSkiller Posted May 6, 2014 Author Share Posted May 6, 2014 Ja mit Corsair Link 2.6.5214. ok danke dann gucke ich mal mit HW Monitor edit 10 Min volllast Prime HW Monitor habe ich under volllast 60-65° http://126th.eu/h100i.jpg Link to comment Share on other sites More sharing options...
Crash-Over Posted May 6, 2014 Share Posted May 6, 2014 die werte sind alle tip top, würde ich sagen und liegen im grünen rahmen für den cpu und war der cpu im oc oder im standard wenn er im standart war würde ich nochmals nachgucken ob alles richtig fest sitzt vllt ist der kühlblock etwas locker und wenn oc ist oder war dann liegt es wirklich im grünen rahmen Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted May 7, 2014 Corsair Employees Share Posted May 7, 2014 Hi TxLSkiller, meinst du die gering steigende Flüssigkeits- zur Sprunghaft steigenden Prozessortemparatur? Dies ist normal. Auch die Temperaturen würde ich nun nicht als auffällig betrachten sofern diese nicht weiter nach Oben hin ausbrechen. Hast du Instabilität des Systemes feststellen können? Viele Grüße! Link to comment Share on other sites More sharing options...
TxLSkiller Posted May 10, 2014 Author Share Posted May 10, 2014 Mir persönlich sind die Temperaturen zuhoch da hatte ich ja mit meiner billigen Lüftkühlung fast die selben Werte weswegen ich auf die h100i umgestiegen bin. Laut Intel darf ich bis 67,4 Grad und komme bei Volllast auf teilweise 65 Grad. Was mir komisch vor kommt, ist der große Temperatur Unterschied zwischen Flüssigkeit und CPU Temperatur teilweiße über 30 Grad sind selbst nach 1 std. prime95. Warum ist die CPUTIN Temperatur bei max 37 Grad und die Core Temperatur bei 60 Grad? Ich bin mit der Kühlleistung keineswegs zufrieden und die Backplat ist bei Sockel 1155 auch zu groß also lose weswegen ich Gummiabstandshalter dazwischen haben von einer h100 von anfang an. Ich habe mein System nicht übertaktet. Habe heute nochmals alles kontrolliert. Link to comment Share on other sites More sharing options...
Plumbumm Posted May 10, 2014 Share Posted May 10, 2014 Hi, Laut Intel darf ich bis 67,4 Grad und komme bei Volllast auf teilweise 65 Grad. Was mir komisch vor kommt, ist der große Temperatur Unterschied zwischen Flüssigkeit und CPU Temperatur teilweiße über 30 Grad sind selbst nach 1 std. prime95. Warum ist die CPUTIN Temperatur bei max 37 Grad und die Core Temperatur bei 60 Grad? Die von Intel angegebenen 67,4 °C beziehen sich auf die Tcase und nicht auf die Core Temperatur. Das ist nen Unterschied! Zur Erklärung: What is Tcase vs. Tjunction? These terms are related to processor temperature for desktop and mobile systems based on Intel® Processors. To allow optimal system operation and long-term reliability, the processor must not exceed the maximum case temperature specifications as defined by the applicable thermal profile. Tcase is the temperature measurement using a thermocouple embedded in the center of the heat spreader. This initial measurement is done at the factory. Post-manufacturing, Tcase is calibrated by the BIOS, through a reading delivered by a diode between and below the cores. Tjunction is synonymous with core temperatures, and calculated based on the output from the Digital Thermal Sensor (DTS) using the formula Tjunction = (Tjunction Max – DTS output). Quelle Und noch was: CPUTIN is different from CoreTemp. CoreTemp is the sensor on the processor while CPUTIN is motherboard CPU temp sensor. Du schreibst das deine cputin (=tcase) 37°C beträgt, das heißt du hast noch 30°C Spielraum bist du an die von Intel maximalen 67,4°C kommst. Wieso ist jetzt die Coretemp mit 65°C zuwarm ? Intel gibt doch gar keine maximale Temperatur dafür an ? Im Internet findet man Aussagen von 100-105°C als maximaler Wert. Ich sehe jetzt ehrlich gesagt kein Problem bei deinen Temperaturen oder ich hab irgendwas falsch verstanden ? MfG. Pb Link to comment Share on other sites More sharing options...
TxLSkiller Posted May 11, 2014 Author Share Posted May 11, 2014 Aber warum zeit mir dann corsair link beim i5 3570k die kern Temperatur an und auch in meinem Asrock Extrem Tuning zeigt er mir als CPU Temperatur die 60 Grad an? also ist em entefekt die kern temperatur neben sache? Link to comment Share on other sites More sharing options...
Plumbumm Posted May 11, 2014 Share Posted May 11, 2014 Nein die Kern Temperatur ist nicht nebensächlich, sie ist am wichtigsten. Nimmt der Kern / die Kerne schaden brauchst du nen neuen CPU. Die Kern Temperatur ist wichtig da sich ab einer gewissen Überschreitung der CPU herunter taktet und mit glück die Notabschaltung vom Mainboard eingreift, sofern das herunter takten nicht hilft die Kerne zukühlen. Beide Werte sind wichtig nur kannste das eine nicht auf das andre beziehen. Link to comment Share on other sites More sharing options...
TxLSkiller Posted May 11, 2014 Author Share Posted May 11, 2014 ok Danke also bin ich mit beiden werden völlig in ordnung? Link to comment Share on other sites More sharing options...
Plumbumm Posted May 11, 2014 Share Posted May 11, 2014 Ja die Werte sind Tip Top, sonst könnte man den CPU ja auch nicht übertakten wenn tcase = coretemp wäre. Link to comment Share on other sites More sharing options...
TxLSkiller Posted May 11, 2014 Author Share Posted May 11, 2014 das stimmt aber das muss man aber auch mal gesagt bekomme. :) danke dafür. Link to comment Share on other sites More sharing options...
Plumbumm Posted May 11, 2014 Share Posted May 11, 2014 Jo kein Thema falls du dann oder irgendwann noch Fragen hast ruhig her damit. Link to comment Share on other sites More sharing options...
Corsair Employees Bluebeard Posted May 13, 2014 Corsair Employees Share Posted May 13, 2014 Super Erklärung Plumbumm, vielen Dank dafür! :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.