Jump to content
Corsair Community

Amd fx 9590


caveman59847

Recommended Posts

Does anyone have the aSuStek Crosshair V Formula Z with a AMD FX 9590 ? I am considering buying the FX 9590 and I hear it gets really hot and have heard both good and bad about using the Corsair H100i cooling unit. Some people have told me to get a better cooler and some have told me it is plenty to cool it. I probably will not do a lot of overclocking since it doesn't have a high overclock ratio. I hear it is hard to gt above 5.3 GHz. I do like to play Metro Last Light and Crysis 3.

 

aSusTek Crosshair V Formula Z

AMD Phenom II X6 1100t 3.3 GHz

Corsair H100i Water Cooling

H.I.S IceQ Turbo Radeon HD 7870 GHz Edition

Corsair Dominator Platinum 8GB

Link to comment
Share on other sites

Well I just got a FX 8350 using the Sabertooth 990FX R2.0 mobo and seeing the temps for the H100i in the CLink software are hitting 35c max but before 30c max using a default fan profile looks like these 8 cores heat up the H100i.

 

But it could be that I'm using AS5 when I re-seated the block might go order some Shin-Etsu X23-7783D and try it with that.

Link to comment
Share on other sites

  • 1 month later...
Does anyone have the aSuStek Crosshair V Formula Z with a AMD FX 9590 ? I am considering buying the FX 9590 and I hear it gets really hot and have heard both good and bad about using the Corsair H100i cooling unit. Some people have told me to get a better cooler and some have told me it is plenty to cool it. I probably will not do a lot of overclocking since it doesn't have a high overclock ratio. I hear it is hard to gt above 5.3 GHz. I do like to play Metro Last Light and Crysis 3.

 

aSusTek Crosshair V Formula Z

AMD Phenom II X6 1100t 3.3 GHz

Corsair H100i Water Cooling

H.I.S IceQ Turbo Radeon HD 7870 GHz Edition

Corsair Dominator Platinum 8GB

 

Perhaps at this point u can tell us cause I can't even get 5.0 it's already hitting 80c and locking/restarting/throttling. That's lapped with Liquid metal TIM and the case open.

 

This means A) I naturally ended up with a defective unit or B) people are talking out their cornhole.

Link to comment
Share on other sites

Well I just got a FX 8350 using the Sabertooth 990FX R2.0 mobo and seeing the temps for the H100i in the CLink software are hitting 35c max but before 30c max using a default fan profile looks like these 8 cores heat up the H100i.

 

But it could be that I'm using AS5 when I re-seated the block might go order some Shin-Etsu X23-7783D and try it with that.

 

C'mon man.. I have a custom loop with a much cooler intel chip and I would have a boner if I hit 35 max. When people say max they expect to hear under full load and not gaming, under a synthetic test like prime or IBT.

 

FTR I idle at almost 40 :p

 

Worth noting the 8350 is half the TDP of the 9590 (OP)

Link to comment
Share on other sites

I am currently using the 9590, and at 5 Ghz when bench marking it gets to about 65-67 degrees depending on the room temperature. Mind you I have 4 fans on my H100i.

 

This is the Info I was looking for :p. I hit 80 at 5.0 but with 2 fans. Really don't know if 2 more will save the day but if it takes 4 fans - the people reporting better temps than yours with 2 are full of it.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...